Products
VBOX Micro Input Module (MIC01)
RLVBMICIN01
●4 analogue inputs
●1 digital input (RPM)
●Compatible with every VBOX data logger except VBOX Sport
●Highly cost effective
●Small and rugged
Overview
The VBOX Micro Input Module (RLVBMICIN01) is a small, highly cost-effective module for applications that only need a few additional signals recorded, with one RPM (digital) input and four analogue inputs.
A 5 V output is available to power sensors that are not already powered by the vehicle loom.
It outputs data in either CAN or RS232 format, depending on the device it is used with.
The Micro Input Module is compatible with every VBOX data logger except VBOX Sport, and comes in several variants depending on the cable needed for each product.
Technical Specifications
Analogue Inputs
●Channels: 4
●DC accuracy: 30 mV
●Input range: 0–14.5 V
●Input impedance: 4 MΩ
RPM Input
●Input type: low tension coil signal
●Min. signal amplitude: 12 V
●Input frequency range: 0–666 Hz
●Resolution: 0.1 RPM
Power
●Input voltage range: 6–30 V DC, powered from connected data logger
●Output: 5 V supply, 300 mA max
●LEDs: 2 LEDs indicating operation
Environmental & Physical
●Operating temperature: -30°C to +70°C
●Storage temperature: -40°C to +85°C
●Weight: approx. 65 g
●Size (W x L x H): 68 x 68 x 30 mm
The VBOX Micro Input Module (RLVBMICIN01) is a small, highly cost-effective module for applications that only need a few additional signals recorded, with one RPM (digital) input and four analogue inputs.
A 5 V output is available to power sensors that are not already powered by the vehicle loom.
It outputs data in either CAN or RS232 format, depending on the device it is used with.
The Micro Input Module is compatible with every VBOX data logger except VBOX Sport, and comes in several variants depending on the cable needed for each product.
Technical Specifications
Analogue Inputs
●Channels: 4
●DC accuracy: 30 mV
●Input range: 0–14.5 V
●Input impedance: 4 MΩ
RPM Input
●Input type: low tension coil signal
●Min. signal amplitude: 12 V
●Input frequency range: 0–666 Hz
●Resolution: 0.1 RPM
Power
●Input voltage range: 6–30 V DC, powered from connected data logger
●Output: 5 V supply, 300 mA max
●LEDs: 2 LEDs indicating operation
Environmental & Physical
●Operating temperature: -30°C to +70°C
●Storage temperature: -40°C to +85°C
●Weight: approx. 65 g
●Size (W x L x H): 68 x 68 x 30 mm