Products
Pedal Force Sensor
Measure pedal application and force with one sensor.
•Compliant with SAE J2909 & ECE regulation 13-H
•Measure the load applied to the accelerator or brake pedal
•Built-in strain gauge amplifier
•Optional 'Event Marker Interface' measures pedal application
Need to measure pedal application and force?
Well now you can, with just one sensor. The VBOX Pedal Force Event Marker Interface connects inline between the Pedal Force Sensor and VBOX data logger, triggering the start of a brake test as soon as any pressure is detected. The VBOX Pedal Force Event Marker Interface constantly monitors the pedal force sensor voltage and adjusts the trigger threshold.
The Pedal Force Event Marker Interface
As soon as any pressure is applied to the brake pedal, the interface outputs a digital signal, which can be used to trigger the start of a test. It works in a similar way to a traditional brake pedal trigger, but also allows for the measurement of pedal force and does not need to be stuck to the pedal. Instead, it can be placed next to the VBOX that it is connected to, or securely inside the VBOX carry case.
This gives you a complete solution which measures the amount of force applied to a brake pedal, as well as pedal application, in accordance with SAE J2909 (Braking) and ECE R13H (Braking Assist Systems) regulations.
The VBOX Pedal Force Event Marker Interface constantly monitors the pedal force sensor voltage and adjusts the trigger threshold. This accounts for any fluctuations in pedal force caused by changes in temperature of the sensor itself, preventing incorrect trigger activation.
Discover more brake testing solutions
Want to learn more about brake testing? See the VBOX 4 data logger.
It also comes with free data analysis software with dedicated brake test plugins, making it quick and easy for you to test in real-time.
Well now you can, with just one sensor. The VBOX Pedal Force Event Marker Interface connects inline between the Pedal Force Sensor and VBOX data logger, triggering the start of a brake test as soon as any pressure is detected. The VBOX Pedal Force Event Marker Interface constantly monitors the pedal force sensor voltage and adjusts the trigger threshold.
The Pedal Force Event Marker Interface
As soon as any pressure is applied to the brake pedal, the interface outputs a digital signal, which can be used to trigger the start of a test. It works in a similar way to a traditional brake pedal trigger, but also allows for the measurement of pedal force and does not need to be stuck to the pedal. Instead, it can be placed next to the VBOX that it is connected to, or securely inside the VBOX carry case.
This gives you a complete solution which measures the amount of force applied to a brake pedal, as well as pedal application, in accordance with SAE J2909 (Braking) and ECE R13H (Braking Assist Systems) regulations.
The VBOX Pedal Force Event Marker Interface constantly monitors the pedal force sensor voltage and adjusts the trigger threshold. This accounts for any fluctuations in pedal force caused by changes in temperature of the sensor itself, preventing incorrect trigger activation.
Discover more brake testing solutions
Want to learn more about brake testing? See the VBOX 4 data logger.
It also comes with free data analysis software with dedicated brake test plugins, making it quick and easy for you to test in real-time.